Use the following steps to access the SOMA Connect ID
SOMA Connect (Raspberry Pi version)
- Plug in SOMA Connect power adapter
- Red and green status LEDs start blinking
- Wait until the green LED is on and not blinking (Software Version 2.3.0 and earlier) / Wait until only the red LED is blinking at a 0.5 or 2 second interval (Software Version 2.3.1 and later)
- It may take anywhere between 30 sec to 1 minute depending on how many SOMA Smart Shades / SOMA Tilt devices you have and how good is the signal between them
- Place the phone next to the SOMA Connect
- Open Smart Shades app > Left Hand Menu > SOMA Connect > Raspberry Pi
- You can find the SOMA Connect ID in the top part of the screen
SOMA Connect U1 (USB Stick)
- Plug in the SOMA Connect
- Wait until the status LED is solid green
- Open the Smart Shades app > Left Hand Menu > SOMA Connect > USB Stick > Solid Green > Settings
- You can find the SOMA Connect ID in the top part of the screen